TOP FEATURES


Machinery pre starts

 

Machinery Pre Starts
Unlimited, ready-to-go digital pre starts
with our free pre start app
Risk management and corrective actions
 
Risk Management &
Corrective Actions

Know the hazards and how to control
them with our automated risk
management reports
Document management and audit trail
 
Document Management
& Audit Trail

Leave paper-based systems behind and
manage and store crucial compliance
information digitally
Dashboards and reporting
 
Dashboards & Reporting
Get information and insights on the
compliance status across your fleet
and sites

 

     

    Machinery Risk Assessments

     

    Machinery Risk Assessments
    Industry leading and specific to your
    machines. Powered by the Machinery Compliance Engine (MCE)
    Service and maintenance management
     
    Service & Maintenance
    Management

    Keep your machines in top condition
    with a preventative maintenance
    program
    safe_operating-procedures
     
    Safe Operating Procedures
    (SOPs)

    Access easy-to-read, comprehensive
    SOPs specific to your machines
    MySite subcontractor machinery management
     
    MySite
    All the tools to manage machinery
    compliance obligations and uphold
    safety on-site
     
    View All Features
      See how Plant Assessor can transform your business
      See Plant Assessor in action

      GET A DEMO

            Case Studies
            Hear from our clients
            Events
            Find us at industry events
            Guides
            Find industry-specific guides
            Learn
            Educational content
            News & Articles
            Industry news and events
              Safety Legislation
              We keep up with safety legislation
              so you don't have to
              Videos
              Find Demos, overviews and informative
              videos here
              Webinars
              View previous and upcoming webinars
              Promotions
              See our current promotions
               
                Is your machinery safety System up to spec?
                Complete our Machinery Safety System Health Check to receive a free personalised report on how to improve your compliance gaps.

                HEALTH CHECK

                 

                  FAQ
                  All of our frequently asked questions
                  Knowledge Base
                  How to use our software
                  View a Demo
                  Let us walk you through Plant Assessor features
                  Release Centre
                  Product updates and release information
                      We are here to help
                      Have a question about Plant Assessor platform? Speak to our friendly support team.

                      CONTACT US

                       

                        3 min read

                        Action management for machinery safety

                        Action management for machinery safety

                        Are you an action hero? It is easy to say yes, but are you really? Proper action management in Plant Assessor is critical to achieving the safest machinery and ensuring you have met your legislative obligation.

                        Plant Assessor aims to be as flexible as possible while trying to maintain the highest level of compliance. Risk controls are provided for every hazard identified on each machine as a result of a very thorough risk assessment process. To manage these actions whilst providing flexibility Plant Assessor has more than one option as to how you manage the actions that result from the assessment process.

                        These are –

                        1. Action is complete

                        2. Action to be completed at a date after the Plant Assessor recommendation

                        3. Action not required

                         

                        Before we go on I think that it is important to mention that each risk control in Plant Assessor is a result of careful consideration of legislative requirements in each jurisdiction, Australian Standards, Codes of Practice, leading practice and diligent application of the risk assessment process including application of the hierarchy of risk control as per the international risk assessment standard.

                         

                        Let’s get back to it. These 3 options seem simple enough, right? Let’s take a closer look to ensure we understand how and when to use each of these options.

                        1. Action is complete  – This means that the Plant Assessor recommended action has been put in place. Use this option as soon after the risk control has been put in place. Once an action is marked as complete the risk management report is immediately updated, a new risk management report must be created to reflect this change.

                        2. Action to be completed at a date after the Plant Assessor recommendation – This option is used when there is a delay in getting the parts for required to put the recommended risk control in place. It creates an audit trail of your safety management. This is sometimes also used when there isn’t the resources available to complete the actions required within the time frame recommended by Plant Assessor, whilst this is not common it still  creates an audit trail of your safety management.

                        3. Action not required – This is perhaps the most misunderstood and therefore incorrectly used of the three options. This option can only be used in two circumstances

                          1. A different but equal or higher risk control to the Plant Assessor recommended risk controls has been put in place to manage the identified hazard e.g. Plant Assessor has asked for a fire extinguisher to be fitted however the machine is fitted with a full mine spec fire suppression system.  

                          2. Under the specific circumstances of use the hazard does not exist e.g the machine is not fitted with headlights and the machine is only used during daylight hours such as on a ride on lawn mower. The hazard, collision due to not being able to see where you are going does not exist in daylight, the machine has a beacon so that bystanders can see the machine. The hazard remains in the risk management report with the assessor comment that the machine must not be used any time other than daylight hours unless the risk control, in this case headlights and rear lighting are fitted.


                        When any of these options are used, Plant Assessor records who and when.  When using the not required option Plant Assessor also records why in the assessor comments. This is because it is unusual to use this option and incorrect use may lead to dire consequences for the user. As a result correct use of the not required function is a key part of Plant Assessor training.



                        Another important point is that Plant Assessor applies risk treatments based on the requirements of each jurisdiction, therefore all questions are required in the jurisdiction unless the feature does not exist on the machine. If the feature does not exist in the machine then the question is answered N/A, if the question is answered NO then it is required regardless of the jurisdiction. Use of the not required function with a comment such as “not required in WA’ or “not applicable” is not sensible given the way Plant Assessor works.

                         

                        Be an action hero and ensure that your staff are safe, your machines are compliant & you have met your legislative obligations.

                         

                        Disclaimer: This information is intended to provide general information on the subject matter. This is not intended as legal or expert advice for your specific situation. You should seek professional advice before acting or relying on the content of this information.

                        What are actions?

                        What are actions?

                        In industries reliant on the operation of machinery, actions are pivotal to helping ensure the safety of workers, reliability of machinery and...

                        Read More
                        Machinery compliance made easy for dealers

                        Machinery compliance made easy for dealers

                        After exploring our Plant Assessor values last month, we thought we’d dig a little deeper into how our members get value out of the Plant Assessor...

                        Read More
                        Safety management can reduce machinery incidents

                        Safety management can reduce machinery incidents

                        This saying is often used in jest on the presumption that the possibility of someone being injured from the resulting activity is almost...

                        Read More